-40%
Single Phase to 3 Phase Converter, MY-PS-10, Best for 7.5Hp(5.5Kw) 23 Amp 200-24
$ 231.91
- Description
- Size Guide
Description
Single Phase to 3 Phase Converter, MY-PS-10, Best for 7.5Hp(5.5Kw) 23 Amp 200-240V Motor, Should Only Be Used for One Motor per One DPS, Input/Output 200V-240VDue to sealed type, very strong against dust, moisture, and heat
Designed to be non-thermal
Doesn't make any high frequency
The efficiency of our DPS is excellent more than other items
The failure rate is very low
Excellent start-up torque / The size is small & easy to install
Semi-permanent lifetime
3 phase motors can be used at your home or workshop
In order to your convenience for your questions, please refer to the following messengers. ▷ Before ordering our DPS, you should check the ampere of your motor and purchase the suitable our DPS. And please give us the information about your motor purpose to recommend suitable DPS to you. Also, please note the below points carefully. 1. MY-PS-10 model is best for 7.5HP motor.(5.5KW, 23 amps) 2. It should only be used for one motor per one DPS. The use of multiple motors is not allowed in our DPS. 3. The input/output voltage of our DPS is 200v~240v. 4. Our DPS is designed to be suitable for use in motor. 5. The efficiency is around 90~95%. 6. The voltage of motor should be 200v~240v. If the voltage of your motor is 380v or 440v, you should change the wire of motor to 200v~240v purpose to connect with output of our DPS. 7. The thickness of wires should be suitable for amperes. 8. Only single phase motor brake is allowed.(Three phase motor brake is not working at our DPS) 9. You could check three phase on the output of DPS when your motor is running. If your motor is not running, you could not check three phase from output of DPS. 10. If your motor has magnetic starter, or electronic switch, or brake, the operating wires of this device should be connected on “U” and “W” of output of our phase converter. Thus, if your motor is not running well or the motor is reversing, you should turn off the power immediately and you have to switch the wires on output(U, V, W) of our phase converter. Actually, when you connect the wires from output of phase converter to your motor, you could succeed in first time, or second time, or third time. A. Detail information 1. Capacity : Suitable for 7.5HP motor(5.5KW, 23 amps) 2. Frequency : 50/60 Hz 3. Dimension(mm) : 99x183x120(WxHxD) 4. Mounting holes : 5Ø 5. Net Weight : 2.6LB(40oz) 6. Voltage of input and output : 200v ~ 240v
Shipping
We offer FREE shipping on all orders!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.